Fjellpulken Cover

Choose according to the model of your pulk:

• XCountry 118, 130, 144
• Xplorer 154, 168, 188

To replace the cover on your pulka, you will need :

• a drill with a 4.1 mm drill bit
• a pop rivet tool
• thin work gloves are recommended

Directions for use:

1. Drill the pop rivets with a 4.1mm drill bit to remove the cleat. You can use a 4.1 mm hand drill.
2. Mount the new sled cover (new pop rivets included).
3. Secure the new cover around the hull with clothespins so that it fits properly.
4. Then drill new holes through the canvas and hull with a 4.1mm drill bit between the old holes.
5. Put the new rivets in place.