Nikwax TX Direct wash in

Instructions for use :

IMPORTANT: Shake bottle before use. Do not use conventional detergents. Always pre-wash separately with Nikwax Tech Wash. Do not dry before waterproofing.

In the washing machine:

1. Remove all traces of detergent from the detergent dispenser.
2. Place the clean garment(s) in the washing machine (max. 2).
3. Add 100 ml of TX.Direct per garment.
4. Start a wash cycle in the Synthetics programme at 30°C with a gentle spin.

By hand (use gloves):

1. Soak 1 clean garment in 7.5 L of warm water in a basin or sink.
2. Add 100 ml TX.Direct.
3. Stir, leave for 5 minutes and then stir again.
4. Rinse thoroughly until the water runs clear.

Drying :

Air dry or tumble dry on low heat if care instructions allow.

• PFC-free
• No aerosols
• Recycled plastic bottle